BMW Esys launcher pro guide on how to program and code with BMW Esys

BMW Esys Launcher Pro Guide on How to Program and Code with BMW E-sys

(To connect to BMW E-sys launcher pro you can use BMW ICOM NEXT or ENET wifi)

1. Connect to BMW car;
2. BMW E-sys Read FA, read and calculate ECU version. (Calculate will take 10 minutes)
3. Select SVT (calculated);
4. Select the ECU to be programmed, check the program file, and click Start to program;(will take 10 minutes or more)
5. Program finished;
6. After programming ECU, you still need to ECU code;
7. Code finished, ECU programming complete. (Tips: If the ECU still does not work, you need to use the BMW ISTA diagnostic software to check the fault and check whether the ECU needs to be matched or learned.)

For more BMW Esys, BMW EsysPlus, and BMW ISTA software, pls click here.